Ecolab LMI03 - Access Code

7.3.4 Access code
Change the access code
Starting point: ‘Options’ screen (12)
Ä Chapter 7.1 ‘Initial start-up’ on page 43
1.
Select ‘Settings
’
(13) and confirm with .
2.
Select ‘Change Access Code
’
(70) and confirm with .
3.
Set the access code using , and .
4.
Confirm the access code with .
ð
The access code is changed.
Installation and start-up
58MAN049432 Rev. 03-03.2024