8.1.2 Factory settings
The ‘Reset to Factory Settings’ option can be used to revert the settings stored in the
LMI03.
After the factory settings have been successfully reset, the start screen for the
LMI03 is displayed.
The device must then be reconfigured.
Ä
Chapter 7.2 ‘Set-up’ on page 44 .
The access code must also be reassigned.
Ä
Chapter 7.3.4 ‘Access code’
on page 58 .
Reset to factory settings
Starting point: ‘Options’ screen (12)
Ä
Chapter 7.1 ‘Initial start-up’ on page 43
1.
Select ‘Reset
’
(17) and confirm with .
2.
Select via or .
3.
Confirm the reset with .
ð
LMI03 restarts
Operation
60MAN049432 Rev. 03-03.2024
To Next Page
Loading...
