10 Fault checking and maintenance
Personnel:
n
Operator
n
Mechanic
n
Service personnel
n
Specialist
Protective equipment:
n
Protective gloves
n
Chemical-resistant protective gloves
n
Protective eyewear
n
Safety shoes
DANGER!
Risk of injury due to the disregard of the specified personal protective
equipment (PPE)!
For all disassembly work, please respect the use of the PSA which is specified
on the product data sheet.
Fault checking
NOTICE!
A ‘SYSTEM F
AULT’ is not acknowledged until the device is switched off and
on.
Maintenance
The LMI03 is largely maintenance-free.
If the display is dirty and no longer readable, the area can be wiped with a damp cloth.
From time to time, the measuring cell should be checked for deposits in the measuring
channel.
The measuring channel can be cleaned using a round brush.
Fault checking and maintenance
73 MAN049432 Rev. 03-03.2024
To Next Page
Loading...
