7.2 Set-up
The following settings can be made in the Setup menu:
n Operating mode
n Conductivity/concentration
n Product name
n Current allocation for conductivity
n Current allocation for temperature
n Invert setpoints
n Configuration of pre-proportioning
n Recording interval for operating data
n Date/time/automatic daylight saving time
Starting point: ‘Options’ screen (12)
Ä
Chapter 7.1 ‘Initial start-up’ on page 43
1.
Press to activate the ‘
Setup’ menu.
ð
The ‘Operating Mode’ screen (20) appears.
The unit offers the option of selecting between ‘AS’ mode (make-up mode;
factory set) and
‘CIP’mode (phase separation).
The special CIP phase separation application performs a precise concentration
measurement of alkaline or acidic cleaning and disinfecting solutions. For an
overview of the changes compared to ‘AS’ mode
Ä
Chapter 4 ‘Function
description’ on page 23 .
2.
If necessary
, use
and to choose between and ‘CIP’ , confirm
your selection with and confirm the change with .
ð
Mode selected.
After selecting the mode, the second screen of the ‘Setup
’ submenu appears:
Installation and start-up
44MAN049432 Rev. 03-03.2024
To Next Page
Loading...
