ð
‘Invert Setpoints
’ (26) appears.
12.
Set the inversion using , and , and confirm with .
ð
Setpoint inversion is set.
Configuration of pre-proportioning
13.
The Configuration of Pre-proportioning menu item appears only when AS
operating mode is selected.
Press .
ð
‘Configuration of Pre-proportioning
’ (27) appears.
14.
Set the pre-proportioning using , and , and confirm with .
ð
Pre-proportioning is set.
Recording interval for operating data
15.
Press .
ð
‘Recording Interval for Operating Data
’ (28) appears.
Installation and start-up
47 MAN049432 Rev. 03-03.2024
To Next Page
Loading...
