Page 3
Table of Contents Page(s)
J2KN PRO DESIGN AND HOW IT WORKS
1. Important Things to Remember 4
2. Instrument Design
2.1. J2KN Pro Base Unit 5
2.2. Remote Display Unit 6
2.3. Accessories 7
2.4. Consumables 8
3. Peltier Cooler 9
4. Gas Path Diagram 10
5. Power Supply 11
6. Radio Communication 12
EMISSIONS ANALYSIS AND RECORDING
7. J2KN Pro Start-up 13
8. Emissions Measurement
8.1 Gas Analysis 14-15
8.2 Printing 16
8.3 Soot Test 17
9. Data Logging onto Memory Card 18
10. Averaging Tests 19
11. Draft/Pressure 20
SETTINGS AND DIAGNOSTICS
12. Adjustments 20-21
12.1 Internal 22-23
13. Control 24
J2KN PRO TIPS AND TECHNICAL DATA
14. Maintenance Tips
14.1 Filters 25-26
14.2 Sample Line and Probe 26
14.3 Sensors 26-27
14.4 Printer Paper 27
14.5 Changing the Fuse 27
15. How to Change Sensors
15.1 O2 Sensor 28
15.2 A5F CO Sensor 29-30
15.3 MEM CO Sensor 31
15.4 NO, NO2, SO2, & High CO Sensors 32-34
16. How to Calibrate Sensors 35-36
17. Flow Velocity Measurement (Option) 37
18. Frequently Asked Questions 38-39
19. Technical Data 40
20. Description of Data on Memory Card 41
21. Calculations 42
22. Software Help 43
To Next Page
Loading...
