Page 43
22. Software Help
If you need help with installation or operation of your
Advanced DAS, Boiler Test Software, or VETS software,
please consult the Operations Manual for your software prod-
uct. If you still need assistance, please contact ECOM.
Tip: If you are having trouble communicating from the
analyzer to a computer, please check these 3 items:
1- Adjustments -> Internal -> RF Connect… Make sure
it is in Remote setting
2- Adjustments -> Internal -> Bluetooth… Make sure
Baud rate=9600 and Protocol=Enhanced
3- Adjustments -> Internal -> USB… Make sure Baud
rate=38400 and Protocol=Enhanced
To Next Page
Loading...
