4.9.16 Connect Console to Your Router: Wi-Fi scan
Entering this mode, system will display all the available Wi-Fi networks.
Select the SSID that you want console to be connected with (only supports
2.4GHz band Wi-Fi network ) , and enter passer word as required.
Press or key to select the Wi-Fi network. Press key to
confirm and enter the password. Press key to return to normal display
mode. It is possible that your network is not listed when Wi-Fi Scan is
performed. Press button and restart Wi-Fi Scan, this will usually solve
the problem.
Only after connect to WLAN you can upload the data to weather website. If
the Wi-Fi network connects successfully, the icon will show on the left
top of the console display. If the data upload to Wunderground.com
successfully, the icon will show on the left top of the console display.
To Next Page
Loading...
