Wundeground.com, not the station). Example,
$oewkrf is not a valid password, but oewkrf$ is
valid.
2. Confirm your station ID is correct. The station ID
is all caps, and the most common issue is
substituting an O for a 0 (or visa versa). Example,
KAZPHOEN11, not KAZPH0EN11
3. If there's a number "1" on the station key, try to i
nput the lower case of letter "L" to replace it.
4. Make sure the date and time is correct on the
console. If incorrect, you may be reporting old
data, not real time data.
5. Make sure your time zone is set properly. If
incorrect, you may be reporting old data, not real
time data.
6. Check your router firewall settings. The console
sends data via Port 80.
1. Check for WiFi signal strength symbol on the
display . If wireless connectivity is
successful and reporting to Wunderground.com,
the WiFi icon will be displayed the home
page.
2. Make sure your modem WiFi settings are correct
(network name, password and security settings).
To Next Page
Loading...
