1 - 4 AG45134 Rev. 3
case the user will be required to correct the interference at his or her
own expense.
Compliance with applicable regulations depends on the use of
shielded cables. It is the user who is responsible for procuring the
appropriate cables.
Identification and Certification Label (ratings plate)
The identification and certification label is attached to the back,
exterior of the unit, above the pinch rollers.
Figure 1-1 Identification and Certification Label
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received including
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.
This product conforms to all applicable provisions of Federal Regulations 21CF
1040.10 as required by 21CFR 1010.2 in effect as of the date of manufacture.
AT TEWKSBURY, MA. U.S.A.
ECRM Incorporated, 554 CLARK ROAD, TEWKSBURY, MA. 01876
MANUFACTURED
Model No.
Serial No.
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
LASER KLASSE 1
interference that may cause undesired operations.
LR67907
C
US
R
To Next Page
Loading...