AG45134 Rev. 3 2
-
1
2
System Operation
Introduction
A complete Mako 4 system includes a control workstation,
CtServer software, a power conditioner, and a Mako 4 platesetter.
Workstation
The control workstation connects directly to the platesetter and runs
the CtServer software. Operating instructions for the workstation
are provided with the workstation.
The operator makes frequent use of the workstation when running
the platesetter. For that reason, the workstation should be set up and
operated next to the platesetter.
CtServer Software
CtServer is used to send jobs to the platesetter. It is also used to
define the plate and pin bar requirements for jobs and communicate
that information to the platesetter, which displays the information
on the control panel LCD.
The use and operation of CtServer is documented in the
CtServer
User’s Guide
, which is delivered as a PDF document on the
CtServer CD.
Power Conditioner
The power conditioner shields the system from as ac power spikes,
voltage drops, and other electrical power disturbances.
To Next Page
Loading...