2 - 12 AG45134 Rev. 3
User Maintenance Menu
PROGRAM VERSIONS
This user maintenance option displays version numbers of the
installed software and firmware. The versions will be displayed
as:
VERSIONS
JP0020 n.n
JA1126 n
“NEXT” TO CONTINUE
Where JP0020 n.n is the part number and revision level of the
controller software, and JA1126 n is the part number and
revision level of the controller firmware.
RUN TRANSPORT
This user maintenance option will run the media transport until
the STOP button is pressed. This function is used to clean the
transport.
RUN MEDIA ROLLERS
This user maintenance option will run the media rollers until the
STOP button is pressed. This function is used to clean the
rollers.
DISPLAY ERROR LOG
This user maintenance option presents system faults (up to a
maximum of 20 faults) in chronological order. TIME is the
elapsed time since the latest power on. SESSION # is the total
number of times the system has been turned on. DEVICE
NAME identifies the system component that failed. ERROR is
an indication of the nature of the fault.
DISPLAY LASER LOG
This user maintenance option presents status information about
the system laser. The information is useful to service personnel,
To Next Page
Loading...