3 - 2 AG45134 Rev. 3
Media Handling
This product is designed to be operated in a safe-light room.
• See plate manufacturer’s specification for safe-light recom-
mendations
• Safe working time varies with manufacturer
The procedure for installing the pin bar and loading the media is
covered in this chapter, as well as removing the pin bar and media.
This chapter is divided into the following sections.
• Installing and Removing the Pin Bar
• Loading Media
• Removing Media from the Output Tray
Mako 4 CTP does not have the ability to “know” which pin bar is
loaded. It is up to you to make sure the pin bar is appropriate for the
plate that is being used.
To Next Page
Loading...