AG45134 Rev. 3 2
-
5
Fan Filters
The system uses 2 fan filters. The filters slide into slots on either
side of the unit (see Figure 2-1).
The Media Transport
The media transport provides for automated delivery of media
to a customer-supplied online processor.
The Pedestal
The pedestal is a specially designed base for the platesetter.
Starting Up the System
Turn on the power switch located on the rear right side of the
machine. Depress one (1) to turn the power
ON
. When the
system completes its initialization, a message appears on the
display indicating
ONLINE.
When
ONLINE
appears, the host
computer can be powered on. Once the host computer is
powered on and running CtServer or the RIP, and the Mako
CTP is
ONLINE,
the system is ready to expose images.
Note: It is recommended that the system be powered on for a 1-
hour warm-up period prior to imaging.
Shutting Down the System
To shut down the system, turn off the power switch located on the
lower right side of the machine. Depress zero (0) to turn the power
OFF
. Shut down the system
only
when the display reads ONLINE,
and the second line is blank. (No operational message visible).
Once the machine is turned off, the host computer will have to be
rebooted after the machine is turned back on in order to establish
communication.
To Next Page
Loading...