DUS 60 Digital Ultrasonic Diagnostic Imaging System Service Manual
- 41 -
WARNING
1. Equipotential bonding: when the device is running with other instruments jointly,
consideration should be given to equipotentiality.
2. Doctors and patients might be exposed to the hazardous and uncontrollable effects of
compensating current caused by unbalanced equipotentiality between indoor medical
device and touchable conducting parts. The safest solution is to build a unified
equipotential network, to which the medical device is connected, using an angular
plug.
3.6. Monitor Connection
The monitor comes already installed with the system. And the system can connect with peripheral
monitor via the VGA port, shown in figure 3-4.
Figure 3-4 Connection of Peripheral Monitor
3.7. External USB-Devices
Connection:
When an external USB-storage device (such as a USB disk or an external hard disk) is connected
to the DUS 60 system, the system detects the device and automatically installs a driver.
Disconnection:
Unplug or eject devices directly.
3.8. Transducer Connection
NOTE:
Ensure that the system is shut down or it is frozen before connecting and disconnecting
transducers.
Flip images horizontally to change the scan direction or vertically to change the image orientation.
The scan direction mark located at the side of
probe indicates the beginning direction of scanning.
The scan direction mark is shown in figure 3-5.
To Next Page
Loading...
