EDAN DUS 60 - Troubleshooting; System Does Not Boot up

DUS 60 Digital Ultrasonic Diagnostic Imaging System Service Manual
- 88 -
6.7. Troubleshooting
6.7.1. System Does Not Boot Up
Is the scanner
plugged in?
Is there AC at the
wall outlet?
Switch is in ON position
Fan noise
+ These two conditions should be the first
items checked if the scanner doesn’t boot
up.
+ Follow the flow chart to determine the
reason the scanner doesn’t boot up.
System is on and ready for use
Figure 6-4 System does not boot up
YES
NO
YES
YES
NO
+ Check the connections to and from the
Power Supply.
+ If there is no power and the connections
are OK, replace the Primary Power Supply.