EDAN iM80 - Replacing the Fan; Replacing the Power Interface Board

iM80 Patient Monitor Service Manual Disassembling the Monitor
- 50 -
To disassemble the power module:
Assemble the power module in the reverse order.
8.6.4 Replacing the Fan
To disassemble the fan:
Assemble the fan in the reverse order.
8.6.5 Replacing the Power Interface Board
To disassemble the power interface board:
Separate main bracket
assembly
as described in
section 8.3
Unscrew the screws
and
nu
ts securing fan
assembly
Unscrew the screws
securing
fan assembly and disconnect
wires connecting it
Separate main bracket
assembly
as described in
section 8.3
Unscrew the screws
securing power
module
Disconnect
wires
connecting power module
Wire
connecting power
interface board
Screws
Nuts