EDAN iM80 - Chapter 8 Monitoring ECG; 8.2 ECG Safety Information

iM80 Patient Monitor Service Manual Disassembling the Monitor
- 46 -
8.5.2 Replacing the IBP-C.O. Module
To disassemble IBP module:
8.5.3 Replacing the SpO
2
Module
To disassemble SpO
2
module:
Assemble the SpO
2
module in the reverse order.
8.5.4 Replacing the CO
2
Module
Separate the front and back assemblies
as described in section 8.3
Unscrew the screws
securing IBP module
Disconnect
wires
connecting IBP module
Separate the front and back
assemblies
Unscrew the screws
securing SpO
2
module
Disconnect
wires
connecting SpO
2
module
Wire connecting
SpO
2
module
Wire connecting
main board
Wire connecting
CO
2
module
Wire connecting
main board
Wire connecting C.O. module
Wire connecting
main
board
Wire connecting
IBP module
Wire c
onnecting
IBP module
Wire connecting
IBP module
Wire connecting
IBP module