Eddyfi Technologies INUKTUN VERSATRAX 100 User Manual

Versatrax 100™
Document: UMDT013103.docm
Revision: A13
Created by: KJB
Date: 15 Oct 2019
3070984-A13
Source Location: C:\ePDM\ISLEng\products\dt-versatrax100mkii\manuals\UMDT013103.docm
Page 19 of 47
User Manual
Camera Height Adjustment
Camera height is adjusted by loosening the four M5 SHCS in the camera slider, moving the camera to the
required height and retightening the screws. In 305 mm (12 in) pipe, the upper adjustment screws are
removed, and lower screws are placed at the top of the slot as illustrated below.
FIGURE 1: CAMERA HEIGHT ADJUSTMENT

Eddyfi Technologies INUKTUN VERSATRAX 100 Specifications

General

Brand	Eddyfi Technologies
Model	INUKTUN VERSATRAX 100
Category	Robotics
Language	English