Document: UMDT013103.docm
Source Location: C:\ePDM\ISLEng\products\dt-versatrax100mkii\manuals\UMDT013103.docm
• Disconnect the power source before servicing the product; otherwise, damage may result.
• Although designed for durability, the vehicle and its components or attached devices may suffer
structural damage if dropped or impacted. A lifeline or fall arrest system should be used at all time
when the vehicle is navigating on a vertical or inverted horizontal position. In addition, stepping on
the tether may pull the vehicle off the wall causing it to fall and sustain physical damage.
• All personnel operating or maintaining this equipment must be trained and competent.
• Our equipment is used in many varied environments from hot/dry to confined spaces to deep
underwater. Such diverse environment risks must be addressed by the operators who are trained
to work in such surroundings. As such, the operator is responsible to determine safe site setup
and appropriate personal protective equipment (PPE) for operation and maintenance of the
equipment.
WARNING: Spark Hazard - Under no circumstances should this equipment be
used in a potentially explosive atmosphere.
WARNING: Trip Hazard - Never stand on the tether. A snap load to the tether
may pull it out from underneath you and cause you to fall. Standing on the tether
may also damage its internal conductors, cause unnecessary wear, and decrease
its life.
WARNING: High Temperature - The camera head and auxiliary lights may
become extremely hot during operation. Allow a cool-down period before
handling.
WARNING: Falling Object - A lifeline or fall arrest system should be used at all
times when the vehicle is navigating on a vertical or inverted horizontal position.
When the vehicle is climbing, never stand below the vehicle operations area.
To Next Page
Loading...
Need help?
General