Chapter 24
| Multicast Filtering Commands
MLD Filtering and Throttling
– 726 –
Console#show ipv6 mld profile 5
MLD Profile 19
Deny
Range ff01::101 ff01::faa
Console#
show ipv6 mld
query-drop
This command shows if the specified interface is configured to drop MLD query
packets.
Syntax
show ipv6 mld query-drop interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Using this command without specifying an interface displays all interfaces.
Example
Console#show ipv6 mld query-drop interface ethernet 1/1
Ethernet 1/1: Enabled
Console#
show ipv6 mld throttle
interface
This command displays the interface settings for MLD throttling.
Syntax
show ipv6 mld throttle interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
To Next Page
Loading...
Need help?
General