– 1 –

Quick Start Guide

28/52-Port L3 Stackable Gigabit Ethernet Switch

ECS4620-28T / ECS4620-28P / ECS4620-28F

ECS4620-52T / ECS4620-52P

The ECS4620-28T, ECS4620-28P, ECS4620-52T, and ECS4620-52P are stackable

Layer 3 switches that provide 24/48 10/100/1000BASE-T RJ-45 ports, and two 10

Gigabit (10G) Small Form Factor Pluggable Plus (SFP+) slots that support 1G and

10G transceivers. The ECS4620-28F is a Layer 3 switch that provides 22 SFP 1G

transceiver slots, two combination Gigabit RJ-45/SFP ports, and two 10G SFP+ slots.

The ECS4620-28P and ECS4620-52P also provide Power-over-Ethernet Plus (PoE+)

capability on the RJ-45 ports.

All switches also provide one rear-panel slot for a dual-port 10G hot-swappable

expansion module.

Note:

For detailed switch installation information, refer to the Installation Guide,

which is on the Documentation CD included with the switch.

Note:

For Safety and Regulatory information, refer to the Safety and Regulatory

Information document included with the switch.

ECS4620-28P

ECS4620-28F

ECS4620-52T

ECS4620-52P

ECS4620-28T

E072014-CS-R03

150200000789A

Edge-Core ECS4620-28F - Page 906

Other manuals for Edge-Core ECS4620-28F