Chapter 31
| VRRP Commands
– 974 –
show vrrp router
counters
This command displays counters for errors found in VRRP protocol packets.
Command Mode
Privileged Exec
Example
Note that unknown errors indicate VRRP packets received with an unknown or
unsupported version number.
Console#show vrrp router counters
Total Number of VRRP Packets with Invalid Checksum : 0
Total Number of VRRP Packets with Unknown Error : 0
Total Number of VRRP Packets with Invalid VRID : 0
Console#
Received Error Address
List VRRP Packets
Number of packets received for which the address list does not
match the locally configured list for the virtual router.
Received Invalid
Authentication Type VRRP
Packets
Number of packets received with an unknown authentication type.
Received Mismatch
Authentication Type VRRP
Packets
Number of packets received with “Auth Type” not equal to the
locally configured authentication method.
Received Error Packets
Length VRRP Packets
Number of packets received with a packet length less than the
length of the VRRP header.
Table 194: show vrrp interface counters - display description
Parameter Description
To Next Page
Loading...
Need help?
General