Edimax EW-7416APn v2 User Manual

60
2-9 MAC Filtering
Another security measure you can use to keep hackers and intruders away
is ‘MAC filtering’. You can pre-define a so-called ‘white-list’, which
contains MAC addresses of the wireless clients you trust. All other
wireless client with the MAC address which is not in your list will be
denied by this wireless range extender/access point.
To setup MAC filtering, please click ‘MAC Filtering’ on the left of web
management interface and the following messages will be displayed:
This page contains two parts of MAC filtering information. All allowed
MAC addresses will be listed in upper part (1), and you can add new
MAC addresses by components in lower part (2).
Here are descriptions of every setup item:
Select Check this box to select one or more MAC
address(es) to delete.
Delete Selected Click this button to delete all selected MAC
address(es).
Delete All Delete all MAC address entries.
Reset Uncheck all selected MAC address entries.
Enable Wireless Check this box to enable MAC address restriction,
Address
filtering
table (1)
Add
new entry
here (2)

Edimax EW-7416APn v2 Specifications

General

2.4 GHz	Yes
Modulation	-
Frequency band	2.4 - 2.4835 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Flash memory	4 MB
Internal memory	16 MB
Processor model	Ralink RT3052
Compatible operating systems	Windows 95/98/ME/2000/XP/Vista
Internal	No
Certification	CE, FCC
Product color	White
Ethernet LAN (RJ-45) ports	1
Security algorithms	128-bit WEP, 64-bit WEP, 802.1x RADIUS, TKIP, WPA, WPA2, WPS
Antennas quantity	2
Antenna gain level (max)	3 dBi
Input current	1 A
AC input voltage	5 V
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	127 mm
Height	30 mm