EasyManuals Logo

Edimax EW-7416APn v2 User Manual

Edimax EW-7416APn v2
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
63
2-10-2 IP Address of the Wireless Range extender/access point
You can change the IP address of this wireless range extender/access
point, so it can become a part of your local network. Please remember
this address or you will not be able to connect the configuration menu of
this wireless range extender/access point.
Default IP address is: 192.168.2.1 / Subnet Mask 255.255.255.0, you can
press and hold ‘Reset/WPS’ button over 10 seconds to change the IP
address back to default value if you forget the IP address you set.
To change IP address, please click ‘System Utility’ on the left, and the
following message will be displayed:
Please input IP address and Subnet Mask in corresponding field, and you
can input the IP address of gateway in ‘Gateway Address’ field, if you
need to manage this wireless range extender/access point from other
network (like Internet).
If you want to activate the DHCP server function of this wireless range
extender/access point, please select ‘Enabled’ in ‘DHCP Server option,
and see next Section for detailed instructions; if you don’t want to use
DHCP server function of this wireless range extender/access point, or
there’s another DHCP server on the network this range extender/access
point connects to, please select ‘Disable’.

Other manuals for Edimax EW-7416APn v2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edimax EW-7416APn v2 and is the answer not in the manual?

Edimax EW-7416APn v2 Specifications

General IconGeneral
2.4 GHzYes
Modulation-
Frequency band2.4 - 2.4835 GHz
Number of users- user(s)
Channels quantity- channels
Networking standardsIEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate300 Mbit/s
Flash memory4 MB
Internal memory16 MB
Processor modelRalink RT3052
Compatible operating systemsWindows 95/98/ME/2000/XP/Vista
InternalNo
CertificationCE, FCC
Product colorWhite
Ethernet LAN (RJ-45) ports1
Security algorithms128-bit WEP, 64-bit WEP, 802.1x RADIUS, TKIP, WPA, WPA2, WPS
Antennas quantity2
Antenna gain level (max)3 dBi
Input current1 A
AC input voltage5 V
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Width127 mm
Height30 mm

Related product manuals