67
Chapter III: Advanced Configuration
3-1 Configuration Backup and Restore
You can backup all configurations of this range extender/access point to a
file, so you can make several copied of range extender/access point
configuration for security reason.
To backup or restore range extender/access point configuration, please
follow the following instructions:
Please click ‘Configuration Tool’ on the left of web management interface,
and the following message will be displayed on your web browser:
Here are descriptions of every buttons:
Backup Settings Press ‘Save...’ button, and you’ll be prompted to
download the configuration as a file, default
filename is ‘config.bin’, you can please save it as
another filename for different versions, and keep it
in a safe place.
Restore Settings Press ‘Browse…’ to pick a previously-saved
configuration file from your computer, and then
click ‘Upload’ to transfer the configuration file to
range extender/access point. After the
configuration is uploaded, the range
extender/access point’s configuration will be
replaced by the file you just uploaded.
Restore to Factory
Default
Click this button to remove all settings you made,
and restore the configuration of this range
extender/access point back to factory default