Edimax EW-7416APn v2 User Manual

65
2-10-3 DHCP Server
This wireless range extender/access point is capable to act as a DHCP
server for your network, and it’s disabled by default. If you want to
activate this function, please click ‘System Utility’ on the left, and the
following message will be displayed:
Here are descriptions of every setup item:
Default Gateway
IP
Please input the IP address of default gateway of
your network here.
Domain Name
Server IP
Please input the IP address of domain name server
(DNS) here.
Start IP Please input the start IP address of the IP range.
End IP Please input the end IP address of the IP range.
Domain Name If you wish, you can also optionally input the
domain name for your network. This is optional.
Lease Time Please choose a lease time (the duration that every
computer can keep a specific IP address) of every
IP address assigned by this range extender/access
point from dropdown menu.
After you finish, please click ‘Apply’, and the following message will be
NOTE: Please remember to select ‘Enable’ in ‘DHCP Server’
option as described in last Section or all DHCP-related fields will
be grayed out, and you will not be able to input any DHCP
p
arameter.

Edimax EW-7416APn v2 Specifications

General

2.4 GHz	Yes
Modulation	-
Frequency band	2.4 - 2.4835 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Flash memory	4 MB
Internal memory	16 MB
Processor model	Ralink RT3052
Compatible operating systems	Windows 95/98/ME/2000/XP/Vista
Internal	No
Certification	CE, FCC
Product color	White
Ethernet LAN (RJ-45) ports	1
Security algorithms	128-bit WEP, 64-bit WEP, 802.1x RADIUS, TKIP, WPA, WPA2, WPS
Antennas quantity	2
Antenna gain level (max)	3 dBi
Input current	1 A
AC input voltage	5 V
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	127 mm
Height	30 mm