2.3 Prevention of personal injury / property damage
– Please read this operating manual carefully to familiarize yourself
with the device and its function. Under no circumstances should you
ignore the safety information.
– Pay particular attention to the information regarding the installation
and initial operation of the device.
– Operate this product only in the proper and appropriate manner and
always within the mandated performance parameters (13 Tech-
nical data).
– Only perform maintenance and service work that is described in the
documentation. Observe the prescribed instruction steps. Only use
original replacement parts from EFFEKTA Regeltechnik GmbH.
2.4 Environmental protection
Send the product back to EFFEKTA Regeltechnik GmbH after the end of its
service life. We will ensure its environmentally friendly disposal.
2.5 Transport and storage
The UPS can only be transported to the intended location in the original packag-
ing. The same applies to moves or returns.
The packaging has a very good device-specific protective function. However, all
devices damaged during transport must be checked by EFFEKTA Regeltechnik
GmbH before the initial operation. The same generally applies for any damages
to the device.
Should the device be in storage for more than 4 months, charging the accumu-
lator of the device becomes imperative. For more, see 4.1 Storage of the
UPS.
Due to the possibility of existing energy storage (accumulators) within a UPS,
devices must generally be inspected by EFFEKTA Regeltechnik GmbH or a
qualified service center for transportation damages.
In the case of transportation damages, there is generally a high risk that the en-
ergy storage units and/or their electrical connections have been affected. As a
result, short circuits and/or the leaking of electrolytes cannot be ruled out. For
this reason, the unit must be isolated until an inspection has been performed.
Furthermore, the UPS device should not be transported or stored upside-down.
To Next Page
Loading...
