Effekta USV MTX Series - EFFEKTA UPS MTX Series Technical Specifications

"VI"- USV 800-3000 VA
Technical Data
s
52
13. Technical data
MTX:
800
800 VA / 720 W
1100
1100 VA / 990 W
UPS input
Mains power supply
1 phase, neutral conductor and PE conductor
Nominal voltage
230 VAC
Voltage ranges
150-234/156-243/162-268/170-280/177-290 VAC
Frequency range
50/60 Hz  5 Hz (automatic detection)
UPS output
Mains power supply
1 phase, neutral conductor and PE conductor
Nominal voltage
200, 208, 220, 230, 240 VAC
Voltage accuracy
1.5 % (inverter mode)
AVR (BOOST) supply mode
+10%
AVR (BUCK) supply mode
-15% (-13% at 200, 208 VAC)
Frequency
50 or 60 Hz  0.1 % (inverter mode)
Wave form
sine
Crest factor
3
Switchover time
typically 4-6 ms, maximum 10 ms
Overload/Alarm time
103-120% / 5 min. supply mode, 1 min. inverter mode
120-150% / 10 s
 150% / immediate shutdown of the UPS
Effi-
ciency
Economy mode
97.5%
AVR mode
95%
Autonomous mode
 88% to 90%
Battery
bank
(internal)
Voltage nom.
24 VDC
Capacity
2x 9 Ah
End charging voltage
27.4 VDC  1%
Maximum charging current
1.5 A
Charging time
after 6 h, 90 % of the capacity is reached (internal battery bank)
Device
Device protection
Overload, deep discharge, overcharge
Dimensions (D x W x H) mm
376 x 145 x 240
Weight
12.70 kg
13.10 kg
Communication
USB, RS232 (Modbus protocol)
Slot for expansion cards, e.g. SNMP
Standards / Guidelines
Safety: EN 62040-1
EMV: EN 62040-2, Class C2
Operation: EN 62040-3
Environment
Temperatue ranges
Operation: 0 .. 40 °C
Storage: -25 .. 55 °C (without accumulators)
Storage: 0 .. 40 °C (with accumulators)
Rel. humidity
0 – 90 % (non-condensing)
Noise level
< 45 dB in standard operating mode, < 55 dB during battery
mode / charging