EFI Fiery EX700i - Page 42

ADMINISTERING THE FIERY CONTROLLER 42
TO SCHEDULE SYSTEM UPDATES
1 Access System Update.
You can access System Updates directly from the Fiery Advanced Controller Interface or from
a client computer using WebTools or Command WorkStation.
If you access System Updates directly from the Fiery Advanced Controller Interface, an
additional feature, Check Now, is available (see page 44). Check Now lists the updates that
are currently available (Patches tab) and the updates that have already been installed (History
tab).
NOTE: Check Now is not available when you access System Updates from Command
WorkStation or WebTools.
NOTE: While updates are being installed, you cannot print to the EX700i. Schedule automatic
updates when no one plans to print. The EX700i may also need to reboot several times during
the update process.
From the Fiery Advanced
Controller Interface
From a client using Command WorkStation From a client using WebTools
• Click Start > All programs >
Fiery > System Updates.
• Start Command Workstation.
• Log on as Administrator with the
appropriate password.
• Choose Configure from the Server menu.
• Choose Configure > Server > System Updates.
• Start a web browser, type the IP address or
DNS name of the EX700i, and then press
Enter.
• Click the Configure tab, and then click
Launch Configure.
• Log on with Administrator privileges.
• Choose Configure > Server > System
Update.