because of cyclic / torsional fatigue.
Heavy force / hand pressure on endo motor while using may even cause file
separation.
Do not press the button to release the files while the motor is running, otherwise
the file may pop out and even hurt the patient.
Electromagnetic noise in surroundings environment may interfere with the device
operation, do not rely on device’s automatic control completely, always pay
attention to the feedback from display.
If there is any abnormal functioning, stop using the device and report to company.
The file separates more easily at high speeds, please follow the manufacturer’s
recommendations of the speed and check the settings of the Endo motor before
use.
Do not use the files are except nickel-titanium or stainless steel.
Gloves and a rubber dam are compulsory during treatment.
Do not forget to remove the file from the Contra-angle after its use.
When using motor combine apex
function, the measure wire must be
connecting with motor by USB socket,
and white slot connects with lip by lip
hook, keep the black slot idle.
The reference point bar will show on
the screen (more information about
reference point bar, please see
chapter 5.2 Screen display).
To Next Page
Loading...
