We strongly recommend check the
function every time before use.
Touch the lip hook with the file in the
contra angle and check that all the
bars on the meter on the screen light
up, and the motor should be reversed
continuously.
The will not be able to perform a precise measurement for every time, especially
in cases of abnormal or unusual morphology of the root canal. The user need
coordinate with x-ray to check the results of the measurement.
If the meter does not move when you enter the file, it is possible that the unit is not
working normally, therefore, stop using.
7.3 Apex operation and not suitable condition
When using as a stand-alone
apex locator. We suggest put
the handpiece on the charge
base to get better visual
angle.
the measure wire must be
connecting with motor by
USB socket, white slot
connects with lip by lip hook,
and black slot connect with
file clip.
the canal length indicator bar
will show on the screen
(more information about
canal length indicator bar,
please see chapter 5.2
Screen display).
To Next Page
Loading...
