Charging indication appears on the screen, and
flashes slowly (○,
1
), when battery is fully charged
or in a state near full charge, the flash will stop and
show like picture (○,
2
).
Fully charged will take about 4 hours, depending
on residual battery power and battery state.
It can be recharged 300-500 times, depending on
the operating conditions of the device.
When changing, other function will forcibly stop,
take from charge base, press main switch, the last
function will recall.
Do not change the battery, only trained technician
or distributor can change the battery, the electronic
parts will be damaged if use a wrong battery or
install with a wrong way.
When using as a stand-alone motor,
the torque bar will show on the screen
(more information about torque
bar, please see chapter 5.2 Screen
display).
Use the E-connect S outside the oral cavity to make sure that the device is
functioning properly.
Change file on time to avoid file separation within the canal. File may separate
To Next Page
Loading...
