Eighteeth E-connect S - Disinfection Components

Page 47 / 59
Disinfection components
Motor Handpiece
Charge Base
Adapter
Measuring Wire
Handpiece Base
Wipe the components with a piece of gauze that has been dampened with Ethanol for
Disinfection (Ethanol 70 to 80 vol%) and wrung out thoroughly.
NOTE
Do not use anything except Ethanol for Disinfection (Ethanol 70 to 80 vol%).
Do not use too much ethanol as it’s going into machine and damage the
components inside.
Single-use component
Disposable Sleeve
NOTE
Single-use handle sleeve must be disposed of and changed after every
treatment. In the event of non-compliance, the contamination risk increases.