16
Chapter 4 Advanced Adjustment / Setting
4-2. Color
●
Color Mode
This function allows easy selection of a desired mode according to monitor application.
Mode Purpose
User1 Select this to dene a desired set of parameter settings.
User2
sRGB Suitable for color matching with sRGB compatible peripherals.
Functions that can be adjusted dier depending on the color mode.
√: Adjustable -: Not adjustable
Function
Color Mode
User1 User2 sRGB
Brightness √ √ √
Contrast √ √ -
Temperature √ √ -
Gamma √ √ -
Advanced
Settings
Hue √ √ -
Saturation √ √ -
Overdrive √ √ -
Gain √ √ -
Reset √ √ √
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on, and then adjust the monitor.
• Perform the range adjustment rst when adjusting color for analog signals (see “Auto Range Adjust” (page
20)).
• The same image may be seen in dierent colors on multiple monitors due to their monitor-specic
characteristics. Make ne color adjustment visually when matching colors on multiple monitors.
●
Brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the
LCD back panel).
Adjustable range
0 to 100
Note
• If you feel that the image is too dark even if the brightness is set to 100, adjust the contrast.
To Next Page
Loading...
Need help?
General