23
Chapter 4 Advanced Adjustment / Setting
4-6. Monitor Settings
●
Input Signal
Settings Function
Auto The monitor automatically recognizes the connector through which signals are
input, and displays the screen. When a PC is turned o or enters the power saving
mode, the monitor automatically displays another signal.
Manual The monitor displays the signal from the selected connector regardless of whether
a signal is input or not. Select the input signal you want to display using the
operation button
.
Note
• If you select “Auto”, the monitor enters the power saving mode after all the PCs have entered the power
saving mode or have been switched o.
●
Power Indicator
This function allows you to set the power indicator (blue) ON / OFF in the monitor ON condition.
Settings Function
On Turns on the power indicator.
O Keeps turning o the power indicator even when the screen is displayed.
●
Languages
This function allows you to select a language for the Setting menu or messages.
Selectable languages
English / Deutsch / Français / Español / Italiano / Svenska / Japanese / Simplied Chinese /
Traditional Chinese
To Next Page
Loading...
Need help?
General