ANNEX / ПРИЛОЖЕНИЕ / PRÍLOHA / PŘÍLOHA
92 NP-eVENT-16_10-2018
9. ANNEX / ПРИЛОЖЕНИЕ / PRÍLOHA / PŘÍLOHA
INSTALLATION RECORD
1. Product: (model)
DK50 D
DK50 DE
3.2. Address of installation:
4. Equipment connected to the compressor:
5. Installation / Commissioning:
6. Contents of operator training:
A. Product completeness check **
A. Description of the product and
functions**
B. Documentation completeness check **
B. Product operation: turning on/off,
controls, control procedures, data on
the display panel, alarms, operation in
alarm conditions**
C. Installation/connection to equipment **
C. Product maintenance: maintenance
intervals, maintenance procedure,
service intervals, operating activities**
D. Safety measures, warnings – their
meaning and compliance **
7. Operator instructed on safety measures, operations and maintenance:
8. Installation and instruction performed by –
First name/Last name
** mark with an “X” in points 5 and 6 (Y - yes /N - no). Enter any observations from points 5 and 6 into the “Notes” section