Delete an existing batch (ST)
By Selecting Batch/Edit Batch/Delete Batch the user will find a list of
all the batches that have already been created (T) or a single batch (S),
together with the number of readings stored in each batch.
To delete a particular batch’s individual readings only use the up and
down arrow soft keys and select the appropriate batch.
After a request for confirmation, the gauge will delete the selected
batch and return the gauge to the list of batches.
To delete another batch, repeat the procedure, to return the gauge
back to the previous menu, press the Back softkey.
The user can delete all batches from the gauge by selecting
Batch/Edit Batch/Delete Batch/All Batches (T).
Exit Batching (ST)
To stop using the Batching Mode and return to the Immediate mode
select Batch/Exit Batching.
Batch Types (ST)
When saving readings into a batch you have a choice of how the
readings are managed within the gauge:
Normal: Each reading is saved into memory.
Press Batch/New Batch/Batch Type and then select Normal.
The batch type can only be changed when creating a new batch.
Counted Average: The average of a predefined number of
readings is saved into memory. For example a counted average of
3 means:
The average of [Reading 1 + Reading 2 + Reading 3] is stored
as the first measurement saved in the memory.
Likewise the average of readings 4 - 6 are stored as the second
measurement in the memory, etc.
The individual readings within the counted average (1.2.3,
4.5.6, etc.) are not saved.
Press Batch/New Batch/Batch Type and then select Counted
Average.
The batch type can only be changed when creating a new batch.
www.elcometer.com 32
To Next Page
Loading...
