Quick-Start Guide
To get started using your K3S right away, please read this page and the two that follow, trying each of the
controls. The text uses braces to refer to numbered elements in the front- and rear-panel illustrations below. For
example, {1} in the text refers to . Later sections provide greater detail on all aspects of K3S operation.
The first thing you need to know about the K3S is that most switches have two functions. Tap (press
briefly) to activate the function labeled on a switch. Hold for about ½ to 1 second to activate the function
labeled below the switch. In the text, tap functions are shown like this example: MENU . An example of a hold
function is CONFIG . Additional typographical conventions are shown on the previous page.
Try tapping MENU {8}. This brings up the MAIN menu. Rotating VFO B {19} selects menu entries, while
rotating VFO A {22} changes their parameters. Tap MENU again to exit the menu.
To Next Page
Loading...
