ElectrIQ PowerPod 2 - Conduit Fitting Measurements; Conduit Fitting Dimension Guide

22 Installation Manual
Mounting System
1" (one
on each
side)
Ensure 1"
between
inverter
and wall
1" (four locations
underneath the
inverter)
1.5" (two locations, one
on each side of the 5
kWh battery enclosure)
1.5" (multiple locations
on the sides of the
battery enclosure)
1" (one location
underneath the Auto-
Transformer)
If needed, use a Greenlee Knockout Punch to create a punch
that will work for your installation.
Please note that all measurements below are for conduit fittings.