Electro-Craft MAX-430 - Page 7

Instruction Manual
List of Tables
IntroList of Tables
C
HAPTER
1
Introduction
C
HAPTER
2
Installation
Inputs and Outputs with Jumpers P6 through P9A
.........................2-1
C
HAPTER
3
Applying Power for the First Time
C
HAPTER
4
Diagnostics/Troubleshooting
MAX-430 System Problem Symptoms and Possible Causes
....................4-3
LED Fault Conditions
...........................................4-4
C
HAPTER
5
Specifications
Performance Specifications
........................................5-1
Electrical Specifications
..........................................5-1
Input Power Requirements
........................................5-1
Physical Specifications
...........................................5-1
C
HAPTER
6
Component Ordering Information
Ordering PWM Servo Drive
.......................................6-1
Ordering Transformers
..........................................6-1
C
HAPTER
7
Reference Drawings
Listing of Drawings
............................................7-1
A
PPENDIX
A
Differences from the MAX-400