56
EBD
EBD: Line Safe Relay Short Circuit Error
EBD
Electronic Control Board defective.
Checks to perform:
EBE / EBF
EBE / EBF: Line Safe Error / Line Safe Sensing Error
EBE / EBF
Electronic Control Board defective.
Checks to perform:
WARNING
Check that all the connectors are correctly
inserted.
WARNING
Check that all the connectors are correctly
inserted.
Replace Electronic Control Board and repeat the diagnostic cycle to check for any further alarms.
Replace Electronic Control Board and repeat the diagnostic cycle to check for any further alarms.
EF1
EF1: Ventilation Blocked Error
EF1
Exhaust blocked, Exhaust Control Thermistor, Inlet Control Thermistor, Contact
Sensor or Electronic Control Board defective.
Checks to perform:
WARNING
Check that all the connectors are correctly
inserted.
Troubleshooting Based on Alarm Codes