To Next Page
P
Paul JonesAug 2, 2025
What to do if the Electrolux T5350 loading door is open?
- EEugene LewisAug 2, 2025
If the loading door of your Electrolux Dryer is open, make sure that it is securely closed.
What to do if the Electrolux T5350 loading door is open?
If the loading door of your Electrolux Dryer is open, make sure that it is securely closed.
What to do if the drawer is out when starting Electrolux T5350?
If you are trying to start your Electrolux Dryer and the drawer is out, make sure the drawer is properly closed before starting.
What to do if Electrolux Dryer displays 'HP HIGH PRESSURE CHECK COOLING SYSTEM AND FILTERS'?
If your Electrolux Dryer displays 'HP HIGH PRESSURE CHECK COOLING SYSTEM AND FILTERS', inspect the cooling system and clean the filters.
General| Brand | Electrolux |
|---|---|
| Model | T5350 |
| Category | Dryer |
| Language | English |
Diagram illustrating machine dimensions and labeled components.
Table of technical specifications: weight, volume, capacity, heating, airflow.
Details on air outlet, gas, and steam inlet/outlet connections.
Information on inlet air overheating thermostat and heating sensor.
Information on outlet air overheating thermostat and heating sensor.
Explains the vacuum switch and its replacement procedure.
Explains the door switch function and its replacement.
Step-by-step instructions for reversing the door.
Procedure for replacing the main drive motor.
Procedure for replacing the fan motor.
Procedure for replacing the fan.
Procedure for replacing the motor pulley.
Procedure for replacing the belt around the motor pulley.
Procedure for replacing the pulley.
General information on electric heating elements.
Procedure for replacing electric heating elements.
Procedure for replacing the gas burner.
Procedure for replacing the gas control box.
Procedure for replacing the gas valve.
Procedure for replacing the flame sensor.
Procedure for replacing the ignition cable.
Instructions for converting the gas heating unit.
Table detailing pressure and adjustment settings for gas types.
Procedure for testing the gas heating unit.
Procedure for replacing the steam calorifier.
Procedure for replacing the damper motor.
Procedure for replacing the drum.
Procedure for replacing the drum bearing.
Procedure for replacing the drum belt.
Procedure for replacing the rear sealing of the drum.
Description of the control system CPU, its functions, and connectors.
Step-by-step guide for replacing the control system CPU.
Procedure for removing and replacing the control knob.
General information on I/O modules type 81 and type 2.
Procedure for replacing I/O modules.
Details on external connections for I/O module type 2 inputs.
Circuit diagrams for central payment and coin meter functions.
Guidelines for tracing errors, safety, and measurements.
Comprehensive list and descriptions of machine error codes.
Instructions for cleaning fan, exhaust duct, and air intake.
Procedure for cleaning the glide surface for the RMC graphite collector.
Procedure for cleaning the area around the drum.
Procedure for cleaning motors.
Procedure for checking and adjusting belt tension.
