Elenos ETG3500 - 3.5 SMS Control and Monitoring

49
3.3 SMS list
3.3.1 SMS commands (submit)
It is possible to submit SMSs in order to perform the following commands:
Command SMS text
Setting power to xxxxx
PWR xxxxx
Setting the equipment to stand-by mode
STBY
Setting the equipment to stand-by mode
OFF
Setting the equipment to On Air mode
ON
Status request
STS
Reset request
RES
Setting data request
STS1
Setting the equipment to mute mode for
xx minutes (no in MPX version)
MUTE xx
Restoring the audio by excluding the com-
mand MUTE AUDIO
AUDIO
Activating power in
CLOCKED mode
CLKP
Activating power in
FIXED MODE
FIXP
The number that sends this SMS will be
disabled upon receipt alarm/status
SMSNO
The “n” number will be disabled upon
receipt alarm/status
SMSNO n
The “n” number will be enabled upon
receipt alarm/status
SMSYES n
3.3.2 Status/alarm SMS (reception)
It is possible to receive status or alarm SMSs, for example composed in this way:
Exxxx ID xx
SMS String
+39xxxxxxxxxx
STBY
No mains xx m
NoAudio
AudioOK
xxx Messaggio di segnalazione
FWD yyyyy W
REFL yyyyy W
FRQ xxx.xxMHz
VDS xxx.xV
IDS xxx.xxA
TEMPMAX xxx.xC
TEMPENV xxx.xC
Exxxx ID xx
SMS String
+39xxxxxxxxxx
-3dB Alarm
No mains xx m
NoAudio
AudioOK
xxx Messaggio di segnalazione
FWD yyyyy W
REFL yyyyy W
FRQ xxx.xxMHz
VDS xxx.xV
IDS xxx.xxA
TEMPMAX xxx.xC
TEMPENV xxx.xC
Instructions for use