ELIS PLZEŇ a. s., Luční 425/15, 301 00 Plzeň, Czech Republic, Phone: +420/377 517 711, Fax: +420/377 517 722 Es90420K/c
8.3.2. Checking the sensor condition (compact version).......................................................................................... 54
8.3.2.1. Measurements to be performed on sensor with no liquid inside (the lining is dry) .................................. 54
8.3.2.2. Checking the sensor condition fitted into piping and flooded with a measured liquid.............................. 55
8.3.3. Checking the sensor condition (remote transmitter with IP67 housing).......................................................... 56
8.3.3.1. Measurements to be performed on sensor with no liquid inside (the lining is dry) .................................. 56
8.3.3.2. Checking the sensor condition fitted into piping and flooded with a measured liquid.............................. 57
8.3.3.3. Checking the condition of the cable connecting sensor and associated transmitter ............................... 57
8.3.4. Checking the sensor condition (remote transmitter with IP68 housing).......................................................... 58
8.3.4.1. Checking the sensor condition fitted into piping and flooded with a measured liquid.............................. 59
8.3.5. Checking the flowmeter condition with a diagnostic module of FLOSET 2.0 program ................................... 59
9. SERVICE ACTIVITIES ................................................................................................................................ 60
9.1. WARRANTY SERVICE ................................................................................................................................................. 60
9.2. POST-WARRANTY SERVICE......................................................................................................................................... 60
10. STANDARD TESTS.................................................................................................................................. 60
11. CALIBRATION.......................................................................................................................................... 60
12. PRODUCT ORDERING ............................................................................................................................ 61
13. PACKAGING............................................................................................................................................. 68
14. PRODUCT ACCEPTANCE....................................................................................................................... 68
15. WARRANTY CONDITIONS...................................................................................................................... 68
To Next Page
Loading...
Need help?
General
