ELIS PLZEŇ a. s., Luční 425/15, 301 00 Plzeň, Czech Republic, Phone: +420/377 517 711, Fax: +420/377 517 722 Es90420K/c
13. PACKAGING
The product packaging shall meet the requirements regarding safe domestic and international transport or
other conditions agreed with the customer. In that, the manufacturer uses its own in-company packaging
directives and standards.
14. PRODUCT ACCEPTANCE
The product acceptance procedure consists of visual inspection and check on the completeness of the
delivered items with reference to the delivery note. Together with the flowmeter FLONET FN20xx.1, the
customer shall receive a delivery note, operation and maintenance manual and a statement on the product
compliance with the respective standards.
15. WARRANTY CONDITIONS
Unless agreed otherwise between the manufacturer and the customer, the warranty period for
electromagnetic flowmeters is 12 months counted from the delivery date. Within the warranty period, the
manufacturer shall repair, free of charge, any product defects due to faulty materials or parts. In case of a
warranty repair, the warranty period shall be extended by the time the flowmeter was inoperative because of
such repair. Manufacturer’s warranty shall not cover product defects or malfunctions due to incorrect product
installation, operation, intentional damage, pilferage or damage due to force majeure.
To Next Page
Loading...
Need help?
General
