37
SECTION 2: MACRODUCT ADVANCED SYSTEM SETUP
2.5 Settings Screen
Summary Logs
Tap or to navigate through the summaries of the 20 most recently
performed iontophoresis tests. A summary log will only be created after
successfully starting iontophoresis.
The Summary screen displays the following:
• The Operator, Test, and Kit LOT information (grayed out if no
entry was made).
• Whether iontophoresis was completed and if there was an error.
• The limb where sweat was collected (based on operator
selection).
• Elapsed sweat collection time (based on when the operator
started and stopped the sweat collection timer – grayed out if the
sweat collection timer was not started).
• The sufficient sweat rate (grayed out if the sweat rate was not
selected).
• Date and time of when iontophoresis started.
Tap to return to the System screen.
Tap to return to the Home screen.
System Logs
System Logs includes device information recorded in addition to the
Summary Logs, such as:
• Settings changes
• Iontophoresis current
• Voltage measurements
• Gel-detect measurements and errors
Logs are grouped on a weekly basis.
Use navigation arrows to scroll through the logs.
Tap to return to the System screen.
Tap to return to the Home screen.
Tap Export to export the logs.
To Next Page
Loading...
Need help?
General