40
1
2
2
3
1
2
3
Built-in Needle Threader
Machine should remain switched OFF with needle in
highest position.
Lower the presser foot. Lower the needle
threader lever as far as it will go. The hook is
automatically inserted into the needle eye.
Bring the thread around threader guide and under the
hook .
Release the lever and let the needle threader return to its
original position.
Pull the thread loop to the back to manually bring the
thread through the needle eye.
• The needle threader can be used with #11 to #16
size needles. Thread weight may vary from 30 to 90.
NOTE: Needle threader cannot be used with a twin
needle.
2
To Next Page
Loading...
