EasyManua.ls Logo

ELNA 3210 - Zigzag Stitch; Overcasting

ELNA 3210
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
4
3
2
11 2 3 4
Zigzag Stitch
The zigzag stitch is a very versatile stitch. Simply change
its width and length. Use the zigzag to finish raw seam
edges, sew narrow hems, sew satin stitch appliques, sew
on buttons, etc.
Overcasting
Simple zigzag stitching is used for finishing raw seam
edges to prevent fabric from raveling. Finishing seam
edges is called overcasting.
CAUTION: Do not set the stitch width lower than 5 when
the overlock foot is attached.
Place the fabric edge next to the black guide on the foot
so the needle swings off the fabric to the right. Sew.
Narrower width (lower number)
Wider width (higher number)
Shorter stitch (lower number)
Longer stitch (higher number)
1 - 2
1 - 6.5
5 - 6.5
0.5 - 3
3 - 5
3 - 5

Table of Contents

Other manuals for ELNA 3210

Related product manuals