Elster Q.Sonic PLUS - MID Requirements

12
MID Requirements
UFM Series 6
Q.Sonic-plus
Operation and Maintenance
Page 63 of 68
12 MID Requirements
12.1 General
This chapter is only applicable when the Ultrasonic Flow Meter Series 6
Q.Sonic
plus
needs to be in accordance with European Directive 2004/22/EC
)*
on measuring instruments (MID) as stated in EC-type Examination
Certificate T10335.
The Ultrasonic Flow Meter Series 6 can be used legally for fiscal metering
based on European Directive 2004/22/EC
*)
, Annex MI-002.
The Ultrasonic Flowmeter Series 6 Q.Sonic
plus
is compliant with Environment
Class M1 / E2
*)
New European Directive valid from 20.04.2016: 2014/32/EU
12.2 EC Declaration of Conformity
Elster ultrasonic gas flow meters are manufactured in accordance with
applicable directives, e.g.:
 Pressure Equipment Directive (PED)
 Equipment and Protective systems intended for use in potential
Explosive Atmospheres (ATEX) Directive
 Electro Magnetic Compatibility (EMC) Directive
 Measuring Instruments Directive (MID)
In compliance with the applicable directives the meters are supplied with the
CE mark and the EC Declaration of Conformity. This declaration is part of
your flow meter documentation since it also contains important details of
your particular flow meter (e.g. PED category, ATEX markings).